Engchange >>

Sensors Beacon

3183 Beacon

SF3183 beacon is installed on the tested carrier for underwater positioning.
Detailed introduction

It provides a sound source for underwater acoustic positioning system. The SF3183 beacon uses the acoustic trigger working mode, that is, the hydroacoustic positioning system emits the interrogation signal, the beacon detects the interrogation signal and responds, and the hydroacoustic positioning system locates by detecting the response signal and works out the position of the beacon to locate the carrier under test.


High frequency deck can match BCN3183-w beacon and achieve locating function through query response mode. It can connect external PC through RS232 interface to setup the deck unit working specification and querying group indication.


Main function:

a. Checking the querying signal and response to programming signal

b. Equipped with low power consumption mode

c. Supporting wireless address programming function

d. Max programming address support: 3609

e. Compatible with Sonardyne Ranger2 ultra positioning system and TZ/OBC long baseline positioning system(Sonardyne 7815 beacon protocol)


1. Beacon specification:

Sr. No.

Model

Specification

1

Dimensions (Diameter* Length)

62mm*430mm(O.D* Length)

2

Weight

1.1±0.1kg

3

Max Operating depth

500m

4

Structural Material

Plastic/Aluminum alloy

5

Working Frequency

35kHz~50kHz

6

Sound source Level

182dB(ref.1uPa@1m)

7

Receiving Sensitivity

105dB(ref.1uPa@1m)

8

Max working range

1000m

9

Working time

Max stand-by time: 700 days

Max launching time: 1,000,000 times

10

Battery

Lithium battery pack

11

Query address

1~401 programmable(Wireless programming)

12

Response frequency

1~9 programmable(Wireless programming)

13

Wireless frequency

433MHz

14

Working temperature

-5℃~45℃

15

Minimum working depth

0.1m

16

Ranging Accuracy

≤1m

2. High frequency deck unit specification

Sr. No.

Model

Specification

1

Working Frequency

35kHz~50kHz

2

Operating Range

1000m

3

Chargeable battery duration

72 hours(Detail depends on using   condition)

4

Battery type

24V chargeable lithium   battery OR external power

5

Power Supply

24V(DC)

6

Standby power consumption

2.3 W

7

Launch period

≥2 Seconds

8

PC interface

RS232

9

Cable length of transducer

20 m (standard, customizable)

10

Locating function

Optional

11

GPS input interface

RS232, Optional

12

dimension(L*W*H mm)

406*330*174

13

Weight (Kg)

10

14

Waterproof Level

IP67

15

Power adaptor

220V(AC)to 24V(DC)


SUNFULL

Contact us


Looking forward to working with you! Contact us

Company

Share

CopyrightWeihai Sunfull Geophysical Exploration Equipment Co.,Ltd 鲁ICP备17002967号-1 Powerby:Lifeng Network